|
|
|
National Stock Number:
5315-01-298-7813
Federal Supply Class:
5315
National Item Identification Number:
012987813
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 500024 | 7X832 | WILLARD CO THE | | 500024 | 8Z037 | TANKINETICS, INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP 202 OR | | STEEL COMP 302 OR | | STEEL COMP 304 OR | | STEEL COMP 304L OR | | STEEL COMP 305 OR | | STEEL COMP 309 OR | | STEEL COMP 310 OR | | STEEL COMP 316 OR | | STEEL COMP 316L OR | | STEEL COMP 317 OR | | STEEL COMP 321 OR | | STEEL COMP 322 OR | | STEEL COMP 324 OR | | STEEL COMP 347 OR | | STEEL COMP 403 OR | | STEEL COMP 405 OR | | STEEL COMP 410 OR | | STEEL COMP 414 OR | | STEEL COMP 420 OR | | STEEL COMP 431 OR | | STEEL COMP 440A OR | | STEEL COMP 440B OR | | STEEL COMP 440C OR | | STEEL COMP 446 OR | | STEEL COMP 633 OR | | STEEL COMP 634 OR | | STEEL CORROSION RESISTING OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHANK LENGTH | 1.120 INCHES NOMINAL | | SHOULDER DIAMETER | 0.365 INCHES MINIMUM AND | | 0.375 INCHES MAXIMUM | | SHANK DIAMETER | 0.250 INCHES NOMINAL | | OVERALL LENGTH | 2.120 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | ROUND | | SECOND END OUTER RADIUS | 0.188 INCHES NOMINAL | | FIRST END LOCATION | THREADED END | | THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD SIZE | 0.250 INCHES | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 1.000 INCHES MINIMUM | | SPECIAL FEATURES | TWO SYMMETRICAL FLATS 0.500 IN. NOM LG 0.312 IN. NOM W ACROSS ON SHOULDER ADJACENT WITH THREAD RUNOUT |
|
|