|
|
|
National Stock Number:
5315-01-295-8806
Federal Supply Class:
5315
National Item Identification Number:
012958806
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 375-05-05 ITEM 10 | 63952 | EDERER INC STAR CRANES DIV | | 375-05-05 PART 40-45-26 | 63952 | EDERER INC STAR CRANES DIV | | 375-40-45-26 | 63952 | EDERER INC STAR CRANES DIV | | 40-45-26 | 63952 | EDERER INC STAR CRANES DIV |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 3.375 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END LOCATION | THREADED END | | FIRST HOLE DIAMETER | 0.344 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | OVERALL LENGTH | 6.562 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED AND COUNTERBORED | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.125 INCHES NOMINAL | | SHANK DIAMETER | 2.352 INCHES MINIMUM AND 2.360 INCHES MAXIMUM | | SHANK LENGTH | 0.750 INCHES NOMINAL | | SHOULDER DIAMETER | 2.3745 INCHES MINIMUM AND 2.3750 INCHES MAXIMUM | | SPECIAL FEATURES | DRILL 0.344 IN. NOMINAL DIAMETER 3.562 INCH NOMINAL DEPTH LONGITUDINAL HOLE IN SHOULDER END,ON AXIAL CENTER INTERSECTING 0.344 INCH NOMINAL DIAMETER PERPENDICULAR HOLE,TAP WITH 0.125 NATIONAL PIPE THREAD; TWO SYMMETRICAL GROOVES PARALLEL TO SHOULDER END 0.750 INCH FROM END,0.344 INCH NOMINAL WIDE BY 0.500 INCH NOMINAL DEEP; KEYWAY 0.312 INCH NOMINAL WIDE 0.156 IN.NOM DEPTH 1.188 INCHES NOMINAL LENGTH WITH A FULL RADIUS CORNER,ON LONGITUDINAL CENTERLINE IN SHANK; SHANK THREADED FOR TN 12 TIMKEN LOCKNUT | | STYLE DESIGNATOR | UNDERCUT | | SURFACE FINISH | 63.0 MICROINCHES SHOULDER OUTSIDE DIAMETER | | THREAD LENGTH | 0.750 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 18 | | UNDERCUT WIDTH | 0.125 INCHES NOMINAL |
|
|