|
|
|
National Stock Number:
5315-01-289-4351
Federal Supply Class:
5315
National Item Identification Number:
012894351
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 31036-44061 | 97384 | TEXTRON SYSTEMS CORPORATION | | 31036-44062 PIECE 3 | 97384 | TEXTRON SYSTEMS CORPORATION |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 2.000 INCHES NOMINAL | | CHAMFER LENGTH | 0.060 INCHES NOMINAL | | DIAMETER | 0.485 INCHES MINIMUM AND 0.500 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.186 INCHES MINIMUM AND 0.191 INCHES MAXIMUM | | HEAD STYLE | FLAT | | HEIGHT | 0.130 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | DRILLED SLOTTED END | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A276 CONDITION A ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 304 OVERALL | | PIN HEAD DIAMETER | 0.984 INCHES MINIMUM AND 1.000 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | SLOT LENGTH | 0.880 INCHES NOMINAL | | SLOT WIDTH | 0.125 INCHES NOMINAL | | SPECIAL FEATURES | SLOT END HAS ANOTHER HOLE DRILLED 0.264 INCHES MINIMUM,0.271 INCHES MAXIMUM DIAMETER,2.375 INCHES LONG DISTANCE FROM CENTERLINE OF HOLE OF END OF PIN | | STYLE DESIGNATOR | STRAIGHT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TYPE 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | UNDER HEAD LENGTH | 2.620 INCHES NOMINAL |
|
|