| DIAMETER | 0.622 INCHES MINIMUM AND 0.623 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL |
| HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD STYLE | FLAT |
| HEIGHT | 0.085 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 630 OVERALL |
| PIN HEAD DIAMETER | 0.735 INCHES MINIMUM AND 0.740 INCHES MAXIMUM |
| SPECIAL FEATURES | HEAD IS THREADED 10-24 NC 2B; 0.250 IN. DEEP |
| STYLE DESIGNATOR | GROOVE |
| SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TY 1 OR 2 OR 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| UNDER HEAD LENGTH | 0.645 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.031 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.593 INCHES NOMINAL |