|
|
|
National Stock Number:
5315-01-257-7799
Federal Supply Class:
5315
National Item Identification Number:
012577799
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.430 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 4.250 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.080 INCHES MINIMUM AND 0.160 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.406 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | JDM-F AO CAGEC 75160 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1045 OVERALL | | PIN OVERALL DIAMETER | 1.5000 INCHES NOMINAL | | PIN OVERALL LENGTH | 5.120 INCHES MINIMUM AND 5.240 INCHES MAXIMUM | | SECOND END TAPER LENGTH | 0.720 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.406 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 9.0 DEGREES MINIMUM AND 12.0 DEGREES MAXIMUM |
|
|