|
|
|
National Stock Number:
5315-01-257-7797
Federal Supply Class:
5315
National Item Identification Number:
012577797
Description:
PIN,GROOVED,HEADLESS
Detail:
A headless item of various shapes, usually cylindrical, having either circular or longitudinal groove(s). Its length must not exceed 12 inches (304 MM). Excludes ROD, GROOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
|
Manufacturer Information:
|
Techincal Specification:
| DIAMETER | 1.9895 INCHES MINIMUM AND 1.9905 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 1.910 INCHES NOMINAL | | EFFECTIVE LENGTH | 8.738 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 6.378 INCHES NOMINAL | | FIRST END LOCATION | BOTH ENDS | | FIRST END TAPER ANGLE | 20.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.390 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 0.188 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | JDM F CAGEC 75160 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1045 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 10.140 INCHES MINIMUM AND 10.260 INCHES MAXIMUM | | SPECIAL FEATURES | BOTH ENDS OF PIN 0.219 DRILL,2.070 DEEP,0.750 DRILL,0.330 DEEP;0.250 THREAD SIZE-28UNF-2B;0.260 MIN DEEP | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.188 INCHES NOMINAL | | SECOND UNDERCUT WIDTH | 0.134 INCHES MINIMUM AND 0.144 INCHES MAXIMUM | | STYLE DESIGNATOR | GROOVE | | UNDERCUT DIAMETER | 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.134 INCHES MINIMUM AND 0.144 INCHES MAXIMUM |
|
|