|
|
|
National Stock Number:
5315-01-257-4508
Federal Supply Class:
5315
National Item Identification Number:
012574508
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.930 INCHES NOMINAL | | FEATURES PROVIDED | CASEHARDENED | | FIRST END TAPER ANGLE | 15.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 0.188 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | JDM 1022F,CAGEC 75160 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 1.5730 INCHES MINIMUM AND 1.5740 INCHES MAXIMUM | | PIN OVERALL LENGTH | 4.540 INCHES NOMINAL | | PROPRIETARY CHARACTERISTICS | PACS | | SECOND END COUNTERBORE DEPTH | 0.260 INCHES MINIMUM | | SECOND END STYLE | CHAMFERED AND COUNTERBORED | | SECOND END TAPER ANGLE | 15.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.060 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER |
|
|