|
|
|
National Stock Number:
5315-01-256-3153
Federal Supply Class:
5315
National Item Identification Number:
012563153
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 128WSM15087-3 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 128WSM15087-3 | 65777 | HOWE MACHINE & TOOL CORP. | | 128WSM15087-3 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY 7075 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE OR | | QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.062 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.127 INCHES MINIMUM AND | | 0.133 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.190 INCHES MINIMUM AND | | 0.196 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.187 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 7.498 INCHES NOMINAL | | PIN OVERALL LENGTH | 7.812 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.6250 INCHES NOMINAL | | SPECIAL FEATURES | TWO RIVETS INCLUDED; END CUT FOR CLAMPING |
|
|