|
|
|
National Stock Number:
5315-01-255-6811
Federal Supply Class:
5315
National Item Identification Number:
012556811
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 2007625-7 | 13002 | GOODRICH CORPORATION | | 2007625-7 | 16413 | COX MACHINE INC | | 2007625-7 | 17576 | GOODRICH CORP DBA GOODRICH CORP | | 2007625-7 | 1K556 | ALRO MACHINE TOOL AND DIE CO INC | | 2007625-7 | 2M490 | NASSAU TOOL WORKS, INC | | 2007625-7 | 2V343 | APEX MANUFACTURING COMPANY, INC. | | 2007625-7 | 36164 | HEROUX-DEVTEK INC. | | 2007625-7 | 3DLX9 | KEELEY AEROSPACE LTD. DBA KEELEY | | 2007625-7 | 4JZH8 | ES3 PRIME LOGISTICS GROUP INC | | 2007625-7 | 6K4C8 | GOODRICH CORPORATION | | 2007625-7 | 6Z056 | CM MANUFACTURING INC | | 2007625-7 | 81755 | LOCKHEED MARTIN CORPORATION | | 2007625-7 | 98247 | CANADIAN COMMERCIAL CORPORATION | | 2007625-7 | H1632 | GKN FOKKER AEROSPACE B.V. | | 5315PL0851066 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.848 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.050 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.256 INCHES MINIMUM AND 0.263 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS-6411 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL UNS K23080 OVERALL | | PIN OVERALL DIAMETER | 1.4960 INCHES MINIMUM AND 1.4970 INCHES MAXIMUM | | PIN OVERALL LENGTH | 3.060 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SPECIAL FEATURES | HOLE DRILLED0.878IN.DIAMETER 2.860IN. DEEP ON THE OTHER END A TAP DRILLED HOLE 0.5000-20UNF-3B 60DEGREES INCLUDED ANGLE CHANFER 0.560IN.DIAMETER | | SURFACE FINISH | 125.0 MICROINCHES OVERALL |
|
|