|
|
|
National Stock Number:
5315-01-253-0940
Federal Supply Class:
5315
National Item Identification Number:
012530940
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 7244824P001 | 03538 | LOCKHEED MARTIN CORPORATION | | 7244824P1 | 03538 | LOCKHEED MARTIN CORPORATION | | 7244824P1VM | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND 0.040 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281 MONEL ALLOY 400,CLASS A,ROD FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | NICKEL ALLOY 400 OVERALL | | PIN OVERALL DIAMETER | 0.9990 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM | | PIN OVERALL LENGTH | 11.500 INCHES NOMINAL | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | MAGNETIC PERMEABILITY SHALL NOT EXCEED 2.0 AFTER FABRICATION | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND END STYLE | SQUARE W/THRU HOLE | | SPECIAL FEATURES | HOLE ON 2ND END IS THREADED 3/8-16 UNC-2B AND 1.000 IN. D |
|
|