|
|
|
National Stock Number:
5315-01-248-2261
Federal Supply Class:
5315
National Item Identification Number:
012482261
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 2844132 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.625 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.125 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.074 INCHES MINIMUM AND 0.078 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | PIN OVERALL DIAMETER | 0.1875 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM | | PIN OVERALL LENGTH | 1.843 INCHES MINIMUM AND 1.906 INCHES MAXIMUM | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.074 INCHES MINIMUM AND 0.078 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 TYPE 4 MIL STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|