|
|
|
National Stock Number:
5315-01-216-6810
Federal Supply Class:
5315
National Item Identification Number:
012166810
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 551AS129-1 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1008 OR | | STEEL COMP 1010 OR | | STEEL COMP 1012 OR | | STEEL COMP 1015 OR | | STEEL COMP 1016 OR | | STEEL COMP 1017 OR | | STEEL COMP 1018 OR | | STEEL COMP 1019 OR | | STEEL COMP 1020 OR | | STEEL COMP 1021 OR | | STEEL COMP 1022 OR | | STEEL COMP 1023 OR | | STEEL COMP 1024 OR | | STEEL COMP 1025 OR | | STEEL COMP 1026 OR | | STEEL COMP 1027 OR | | STEEL COMP 1029 OR | | STEEL COMP 1030 OR | | STEEL COMP 1031 OR | | STEEL COMP 1033 OR | | STEEL COMP 1034 OR | | STEEL COMP 1035 OR | | STEEL COMP 1036 OR | | STEEL COMP 1037 OR | | STEEL COMP 1038 OR | | STEEL COMP 1039 OR | | STEEL COMP 1040 OR | | STEEL COMP 1041 OR | | STEEL COMP 1042 OR | | STEEL COMP 1043 OR | | STEEL COMP 1044 OR | | STEEL COMP 1045 OR | | STEEL COMP 1046 OR | | STEEL COMP 1048 OR | | STEEL COMP 1049 OR | | STEEL COMP 1050 OR | | STEEL COMP 1051 OR | | STEEL COMP 1052 OR | | STEEL COMP 1053 OR | | STEEL COMP 1055 OR | | STEEL COMP 1060 OR | | STEEL COMP 1070 OR | | STEEL COMP 1078 OR | | STEEL COMP 1080 OR | | STEEL COMP 1084 OR | | STEEL COMP 1090 OR | | STEEL COMP 1095 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A576 ASSN STD SINGLE MATERIAL RESPONSE OR | | ASTM A675 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHANK LENGTH | 1.844 INCHES NOMINAL | | SHOULDER DIAMETER | 0.495 INCHES MINIMUM AND | | 0.505 INCHES MAXIMUM | | SHANK DIAMETER | 0.243 INCHES MINIMUM AND | | 0.248 INCHES MAXIMUM | | OVERALL LENGTH | 3.000 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.094 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | SQUARE | | FIRST END LOCATION | SHOULDER END |
|
|