|
|
|
National Stock Number:
5315-01-216-5808
Federal Supply Class:
5315
National Item Identification Number:
012165808
Description:
PIN,SHOULDER,HEADED
Detail:
A CYLINDRICALLY-SHAPED HEADED ITEM, HAVING A SOLID SHANK IN STEPS OF TWO OR MORE DIFFERENT DIAMETERS UNDER AND IN ADDITION TO THE HEAD. EXCLUDES PIN, ECCENTRIC.
|
Manufacturer Information:
| 123250C | 45152 | OSHKOSH CORP | | 123250C | 75Q65 | OSHKOSH DEFENSE LLC |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.368 INCHES NOMINAL | | ANGLE BETWEEN CENTERLINE OF HOLES | 30.0 DEGREES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 0.250 INCHES NOMINAL | | FIRST STEP DIAMETER | 2.998 INCHES MINIMUM AND 2.999 INCHES MAXIMUM | | FIRST STEP LENGTH | 1.380 INCHES MINIMUM AND 1.390 INCHES MAXIMUM | | HARDNESS RATING | 38.0 ROCKWELL C MINIMUM OVERALL AND 42.0 ROCKWELL C MAXIMUM OVERALL | | HEAD STYLE | FLAT CHAMFER | | HEIGHT | 0.190 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END W/TWO DRILLED HOLES | | MATERIAL | STEEL COMP 4340 OVERALL | | PIN HEAD DIAMETER | 3.250 INCHES NOMINAL | | PROPRIETARY CHARACTERISTICS | PACS | | SECOND HOLE DIAMETER | 0.250 INCHES NOMINAL | | SECOND STEP DIAMETER | 2.2492 INCHES MINIMUM AND 2.2496 INCHES MAXIMUM | | SECOND STEP LENGTH | 3.355 INCHES NOMINAL | | SPECIAL FEATURES | THIRD STEP THREADED 2.000-20UNF-2A; FIRST AND SECOND STEPS FINISHED TO 32.0 MICROINCHES; TAPPED HOLE CENTERED IN HEADED END 0.562-12UNC-2B 0.750 IN. DEEP | | THIRD STEP DIAMETER | 2.000 INCHES NOMINAL | | THIRD STEP LENGTH | 1.010 INCHES NOMINAL | | UNDER HEAD LENGTH | 5.750 INCHES NOMINAL |
|
|