|
|
|
National Stock Number:
5315-01-197-6264
Federal Supply Class:
5315
National Item Identification Number:
011976264
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 13211E9256 | 97403 | CECOM LR CENTER |
|
Techincal Specification:
| CHAMFER LENGTH | 0.078 INCHES NOMINAL | | DIAMETER | 0.620 INCHES MINIMUM AND 0.622 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.145 INCHES MINIMUM AND 0.185 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM | | HARDNESS RATING | | | HEIGHT | 0.093 INCHES NOMINAL | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A322 ASSN STD ALL MATERIAL RESPONSES OR ASTM A331 ASSN STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 4140 OR STEEL COMP 4142 OR STEEL COMP 8640 OVERALL | | PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.750 INCHES NOMINAL | | STYLE DESIGNATOR | STRAIGHT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR ASTM B633,TYPE 2,CLASS FE/ZN 5 ASSN STD 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OR ZINC OVERALL | | UNDER HEAD LENGTH | 2.006 INCHES MINIMUM AND 2.026 INCHES MAXIMUM |
|
|