|
|
|
National Stock Number:
5315-01-197-2263
Federal Supply Class:
5315
National Item Identification Number:
011972263
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 30.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.240 INCHES NOMINAL | | HARDNESS RATING | 50.0 ROCKWELL C MINIMUM AND 58.0 ROCKWELL C MAXIMUM OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | -1045F,FSCM 75160 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 2.0000 INCHES NOMINAL | | PIN OVERALL LENGTH | 5.270 INCHES MINIMUM AND 5.390 INCHES MAXIMUM | | SECOND END COUNTERBORE DEPTH | 1.240 INCHES NOMINAL | | SECOND END COUNTERBORE DIAMETER | 0.656 INCHES NOMINAL | | SECOND END TAPER LENGTH | 0.120 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED AND COUNTERBORED | | SECOND END TAPER ANGLE | 30.0 DEGREES NOMINAL | | SPECIAL FEATURES | THREADED HOLE COUNTERBORE END 3/4-10 UNC,0.656 IN. DIA,0.740 IN. DEEP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DTW 765,FSCM 75160 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ZINC OVERALL |
|
|