|
|
|
National Stock Number:
5315-01-186-0832
Federal Supply Class:
5315
National Item Identification Number:
011860832
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 18C29 | 87187 | BORDEN INC/CHEMICAL DIV KRYLON DEPT |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 5.750 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.062 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.188 INCHES MINIMUM AND 0.204 INCHES MAXIMUM | | HARDNESS RATING | 248.0 BRINELL STANDARD MINIMUM AND 293.0 BRINELL STANDARD MAXIMUM OVERALL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | 911W37,FSCM 36422 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4140 OVERALL | | PIN OVERALL DIAMETER | 1.4980 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM | | PIN OVERALL LENGTH | 9.188 INCHES NOMINAL | | SECOND END COUNTERBORE DIAMETER | 0.125 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED AND COUNTERBORED | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.062 INCHES NOMINAL | | SPECIAL FEATURES | COUNTERBORED HOLE THREADED 0.125-NPT; 0.250 IN. W GROOVE ON COUNTERBORED END |
|
|