|
|
|
National Stock Number:
5315-01-185-9500
Federal Supply Class:
5315
National Item Identification Number:
011859500
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 014742-501 | 59027 | MEGGITT DEFENSE SYSTEMS, INC. DBA MEGGITT WESTERN DESIGN | | 014742-501 | 62228 | MEGGITT DEFENSE SYSTEMS, INC. |
|
Techincal Specification:
| MATERIAL | STEEL CORROSION RESISTING OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 PH13-8 MO,COND. A ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TYPE I,II,OR III FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | UNDERCUT | | SHANK LENGTH | 0.226 INCHES NOMINAL | | SHOULDER DIAMETER | 0.438 INCHES NOMINAL | | SHANK DIAMETER | 0.3125 INCHES MINIMUM AND | | 0.3140 INCHES MAXIMUM | | OVERALL LENGTH | 1.875 INCHES NOMINAL | | UNDERCUT DIAMETER | 0.245 INCHES MINIMUM AND | | 0.255 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.080 INCHES NOMINAL | | SECOND SHANK DIAMETER | 0.3125 INCHES MINIMUM AND | | 0.3140 INCHES MAXIMUM | | SECOND SHANK LENGTH | 1.250 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TIP RADIUS | 0.060 INCHES NOMINAL | | FIRST END TAPER LENGTH | 0.800 INCHES NOMINAL | | FIRST END TAPER ANGLE | 25.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER LENGTH | 0.030 INCHES NOMINAL | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END LOCATION | TAPERED END | | THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD SIZE | 0.312 INCHES | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.259 INCHES NOMINAL | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | SPECIAL FEATURES | TAPERED END IS DIAMOND SHAPED | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 59027 | | DESIGN CONTROL REFERENCE | 014742-501 |
|
|