|
|
|
National Stock Number:
5315-01-185-2775
Federal Supply Class:
5315
National Item Identification Number:
011852775
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 704AS4163-3 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| MATERIAL | STEEL COMP XM-13 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.040 INCHES MINIMUM AND | | 0.060 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 30.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.097 INCHES MINIMUM AND | | 0.102 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.097 INCHES MINIMUM AND | | 0.102 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.170 INCHES MINIMUM AND | | 0.210 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 3.187 INCHES NOMINAL | | PIN OVERALL LENGTH | 3.530 INCHES MINIMUM AND | | 3.590 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.6224 INCHES MINIMUM AND | | 0.6234 INCHES MAXIMUM |
|
|