| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.952 INCHES MINIMUM AND 0.977 INCHES MAXIMUM |
| CHAMFER LENGTH | 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
| DIAMETER | 0.090 INCHES MINIMUM AND 0.094 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.035 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| HARDNESS RATING | 55.0 ROCKWELL C MINIMUM OVERALL |
| HEAD STYLE | FLAT FILLISTER |
| HEIGHT | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL CORROSION RESISTING OVERALL |
| PIN CHAMFER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| PIN HEAD DIAMETER | 0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
| SECOND HOLE DIAMETER | 0.035 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| UNDER HEAD LENGTH | 1.030 INCHES MINIMUM AND 1.050 INCHES MAXIMUM |
| STYLE DESIGNATOR | STRAIGHT |
| SURFACE FINISH | 63.0 MICROINCHES OVERALL |