|
|
|
National Stock Number:
5315-01-169-4464
Federal Supply Class:
5315
National Item Identification Number:
011694464
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 9D9257 | 11083 | CATERPILLAR INC |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.880 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 7.630 INCHES NOMINAL | | FIRST END LOCATION | LONG END | | FIRST END TAPER ANGLE | 20.0 DEGREES MINIMUM AND 30.0 DEGREES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 0.625 INCHES NOMINAL | | HARDNESS RATING | 42.0 ROCKWELL C MINIMUM OVERALL AND 47.0 ROCKWELL C MAXIMUM OVERALL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL | STEEL OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 9.060 INCHES NOMINAL | | SECOND END CORNER RADIUS | 0.060 INCHES NOMINAL | | SECOND END STYLE | RADIUS | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND HOLE DIAMETER | 0.391 INCHES NOMINAL | | SECOND SHANK DIAMETER | 1.250 INCHES NOMINAL | | SECOND SHANK LENGTH | 7.310 INCHES NOMINAL | | SHANK LENGTH | 0.440 INCHES NOMINAL | | SHANK DIAMETER | 1.840 INCHES MINIMUM AND 2.160 INCHES MAXIMUM | | SHOULDER DIAMETER | 1.840 INCHES MINIMUM AND 2.160 INCHES MAXIMUM | | STYLE DESIGNATOR | UNDERCUT | | UNDERCUT DIAMETER | 1.250 INCHES NOMINAL | | UNDERCUT WIDTH | 0.870 INCHES NOMINAL |
|
|