|
|
|
National Stock Number:
5315-01-142-9996
Federal Supply Class:
5315
National Item Identification Number:
011429996
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 209F859-5 | 05606 | GENERAL DYNAMICS-OTS, INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP 440C OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM AND | | 62.0 ROCKWELL C MAXIMUM OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.040 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | HOLE ARRANGEMENT STYLE | DRILLED THRU CENTER | | FIRST HOLE DIAMETER | 0.138 INCHES NOMINAL | | SURFACE FINISH | 32.0 MICROINCHES CHAMFERED END | | 32.0 MICROINCHES OUTSIDE DIAMETER | | PIN OVERALL LENGTH | 1.470 INCHES MINIMUM AND | | 1.490 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.3743 INCHES MINIMUM AND | | 0.3745 INCHES MAXIMUM | | SPECIAL FEATURES | CHAMFER ON 2ND END 23 DEG 45 MIN 36 SECONDS; CENTER HOLE THREADED 0.138-32 UNC 2B | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 05606 | | DESIGN CONTROL REFERENCE | 209F859-5 |
|
|