| DIAMETER | 0.1242 INCHES MINIMUM AND 0.1245 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.100 INCHES NOMINAL |
| FIRST END STYLE | SQUARE |
| FIRST HOLE DIAMETER | 0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM |
| HARDNESS RATING | 42.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD STYLE | FLAT |
| HEIGHT | 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5616 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| PIN HEAD DIAMETER | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| MATERIAL | STEEL COMP 615 OVERALL |
| SPECIAL FEATURES | DRY FILM LUBRICANT PER AMS 2526 ON GROOVE AND OPPOSITE HEAD END |
| STYLE DESIGNATOR | GROOVE |
| SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER |
| UNDER HEAD LENGTH | 0.670 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.040 INCHES MAXIMUM |
| UNDERCUT DIAMETER | 0.1145 INCHES MAXIMUM |