|
|
|
National Stock Number:
5315-01-133-2374
Federal Supply Class:
5315
National Item Identification Number:
011332374
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 10123084 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 74A26019-2001 | 2V343 | APEX MANUFACTURING COMPANY, INC. | | 74A426019-2001 | 0PXV4 | THE BOEING COMPANY | | 74A426019-2001 | 56540 | ASSOCIATED AIRCRAFT MANUFACTURING & SALES, INC. | | 74A426019-2001 | 6Z056 | CM MANUFACTURING INC | | 74A426019-2001 | 76301 | THE BOEING COMPANY | | 74A426019-2001 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.375 INCHES NOMINAL | | FIRST END STYLE | ROUND | | FIRST END LOCATION | ROUND END | | FIRST END OUTER RADIUS | 0.375 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.281 INCHES MINIMUM AND 0.288 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | OVERALL LENGTH | 2.825 INCHES NOMINAL | | MATERIAL | STEEL COMP XM-13 OVERALL | | NOMINAL THREAD SIZE | 0.190 INCHES | | SECOND END STYLE | SQUARE | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND SHANK DIAMETER | 0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM | | SECOND SHANK LENGTH | 1.480 INCHES NOMINAL | | SECOND UNDERCUT DIAMETER | 0.150 INCHES NOMINAL | | SECOND UNDERCUT WIDTH | 0.060 INCHES NOMINAL | | SHANK DIAMETER | 0.750 INCHES NOMINAL | | SHANK LENGTH | 0.750 INCHES NOMINAL | | SHOULDER DIAMETER | 0.3735 INCHES NOMINAL | | STYLE DESIGNATOR | UNDERCUT | | SURFACE FINISH | 6.0 MICROINCHES OUTSIDE DIAMETER | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.340 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) | | UNDERCUT DIAMETER | 0.3495 INCHES NOMINAL | | UNDERCUT WIDTH | 0.080 INCHES NOMINAL |
|
|