|
|
|
National Stock Number:
5315-01-122-3352
Federal Supply Class:
5315
National Item Identification Number:
011223352
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 10122938 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 196B8214 | 02723 | ABBOTT PRODUCTS INC | | 196B8214 | 05606 | GENERAL DYNAMICS-OTS, INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4140 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE MANGANESE OR | | PHOSPHATE ZINC OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DOD-P-16232,TYPE M,CLASS 1 MIL SPEC 1ST TREATMENT RESPONSE OR | | DOD-P-16232,TYPE Z,CLASS 1 MIL SPEC 2ND TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND | | 38.0 ROCKWELL C MAXIMUM OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.020 INCHES MINIMUM AND | | 0.060 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | OVAL | | SECOND END OUTER RADIUS | 0.470 INCHES MINIMUM AND | | 0.530 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.095 INCHES MINIMUM AND | | 0.097 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.280 INCHES NOMINAL | | PIN OVERALL LENGTH | 2.130 INCHES MINIMUM AND | | 2.170 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.2100 INCHES MINIMUM AND | | 0.2140 INCHES MAXIMUM | | SPECIAL FEATURES | HOLE LOCATED CHAMFERED END |
|
|