|
|
|
National Stock Number:
5315-01-117-7817
Federal Supply Class:
5315
National Item Identification Number:
011177817
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| B135694-1 | 13030 | LOCKHEED MARTIN SIPPICAN, INC. |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.250 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.750 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 15.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.120 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.047 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | NICKEL ALLOY 502 OVERALL | | PIN OVERALL DIAMETER | 0.2440 INCHES MINIMUM AND 0.2450 INCHES MAXIMUM | | PIN OVERALL LENGTH | 3.250 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.047 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER |
|
|