|
|
|
National Stock Number:
5315-01-110-9351
Federal Supply Class:
5315
National Item Identification Number:
011109351
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| MS16555-362 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 20.0 DEGREES MINIMUM AND 30.0 DEGREES MAXIMUM | | FIRST END TAPER LENGTH | 0.047 INCHES MINIMUM AND 0.125 INCHES MAXIMUM | | HARDNESS RATING | 47.0 ROCKWELL C MINIMUM AND 58.0 ROCKWELL C MAXIMUM OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PIN OVERALL LENGTH | 1.740 INCHES MINIMUM AND 1.760 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.3751 INCHES MINIMUM AND 0.3753 INCHES MAXIMUM | | SECOND END TAPER ANGLE | 10.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.351 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SPECIAL FEATURES | SMALL CHAMFER END MAY BE 0.351 NOMINAL RADIUS IN LIEU OF CHAMFER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | -DOD-16232 TY Z CL 2 NATIONAL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE OVERALL |
|
|