|
|
|
National Stock Number:
5315-01-102-7815
Federal Supply Class:
5315
National Item Identification Number:
011027815
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 12295224 | 19200 | US ARMY ARDEC RDECOM |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.125 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.015 INCHES MINIMUM AND 0.060 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.094 INCHES MINIMUM AND 0.097 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A576 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1010 OVERALL | | PIN OVERALL LENGTH | 1.000 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.3100 INCHES MINIMUM AND 0.3150 INCHES MAXIMUM | | SECOND END TAPER LENGTH | 0.125 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-L-46010 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | LUBRICANT OVERALL |
|
|