|
|
|
National Stock Number:
5315-01-096-3207
Federal Supply Class:
5315
National Item Identification Number:
010963207
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 2G8621 | 11083 | CATERPILLAR INC |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 3.310 INCHES MINIMUM AND 4.270 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 30.0 DEGREES NOMINAL | | FIRST HOLE DIAMETER | 10.5 MILLIMETERS NOMINAL | | FIRST END TAPER LENGTH | 0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL | STEEL COMP 1045 OVERALL | | PIN OVERALL DIAMETER | 2.0110 INCHES MINIMUM AND 2.0150 INCHES MAXIMUM | | PIN OVERALL LENGTH | 6.980 INCHES MINIMUM AND 7.000 INCHES MAXIMUM | | SECOND END COUNTERSINK ANGLE | 60.0 DEGREES NOMINAL | | SECOND END COUNTERSINK DIAMETER | 0.960 INCHES MINIMUM AND 1.000 INCHES MAXIMUM | | SECOND END TAPER ANGLE | 30.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 4.8 MILLIMETERS NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED AND COUNTERSUNK | | SPECIAL FEATURES | GREASE FITTING HOLE DRILLED 3.250 IN. DEEP ON LONGITUDINAL CENTER |
|
|