|
|
|
National Stock Number:
5315-01-095-5865
Federal Supply Class:
5315
National Item Identification Number:
010955865
Description:
PIN,SHOULDER,HEADED
Detail:
A CYLINDRICALLY-SHAPED HEADED ITEM, HAVING A SOLID SHANK IN STEPS OF TWO OR MORE DIFFERENT DIAMETERS UNDER AND IN ADDITION TO THE HEAD. EXCLUDES PIN, ECCENTRIC.
|
Manufacturer Information:
| 101-0994 | 03670 | TYCO FIRE PRODUCTS LP | | 2621-926-15 PIECE 15 1 1-2IN | 16626 | CIRCOR INTL INC | | 426-06-14-0171-0C2N | 16626 | CIRCOR INTL INC | | 426-06-14-0171-0C2N | 35795 | LESLIE CONTROLS, INC. | | 2621-926-15 PIECE 15 1 1-2IN | 35795 | LESLIE CONTROLS, INC. | | 2621-926-15 PIECE 15 1 1-2IN | 96169 | ELECTRIC BOAT CORPORATION | | 803-5001003-C7X2-57 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 803-5001003-X7XX-57 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 5001003-X7XX-57 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1018 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CHROMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | SHOULDER | | UNDER HEAD LENGTH | 2.033 INCHES MINIMUM AND | | 2.093 INCHES MAXIMUM | | FIRST STEP DIAMETER | 0.610 INCHES MINIMUM AND | | 0.640 INCHES MAXIMUM | | FIRST STEP LENGTH | 0.126 INCHES NOMINAL | | SECOND STEP DIAMETER | 0.312 INCHES NOMINAL | | SECOND STEP LENGTH | 0.047 INCHES MINIMUM AND | | 0.078 INCHES MAXIMUM | | THIRD STEP DIAMETER | 0.372 INCHES MINIMUM AND | | 0.373 INCHES MAXIMUM | | THIRD STEP LENGTH | 1.844 INCHES MINIMUM AND | | 1.905 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.047 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | HEAD STYLE | DOUBLE CHAMFER | | PIN HEAD DIAMETER | 0.985 INCHES MINIMUM AND | | 1.015 INCHES MAXIMUM | | HEIGHT | 0.172 INCHES MINIMUM AND | | 0.202 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.062 INCHES MINIMUM AND | | 0.078 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.907 INCHES MINIMUM AND | | 0.967 INCHES MAXIMUM |
|
|