|
|
|
National Stock Number:
5315-01-089-7238
Federal Supply Class:
5315
National Item Identification Number:
010897238
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 8B721034-23 | 89446 | HILLER AIRCRAFT CORPORATION |
|
Techincal Specification:
| FIRST HOLE DIAMETER | 0.070 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.070 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.090 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 4.200 INCHES NOMINAL | | PIN OVERALL LENGTH | 4.406 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.1220 INCHES MINIMUM AND | | 0.1240 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 89446 | | DESIGN CONTROL REFERENCE | 8B721034-23 | | MATERIAL | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.047 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
|
|