|
|
|
National Stock Number:
5315-01-072-4487
Federal Supply Class:
5315
National Item Identification Number:
010724487
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 12280536 | 19200 | US ARMY ARDEC RDECOM |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.250 INCHES NOMINAL | | FIRST END LOCATION | THREADED END | | FIRST END STYLE | CHAMFERED W/THRU HOLE | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.040 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.1205 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | DRILLED SHANK THREADED PIN | | OVERALL LENGTH | 1.380 INCHES NOMINAL | | MATERIAL | STEEL COMP 1015 OVERALL | | NOMINAL THREAD SIZE | 0.375 INCHES | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SHANK LENGTH | 0.500 INCHES NOMINAL | | SHOULDER DIAMETER | 0.375 INCHES NOMINAL | | SPECIAL FEATURES | THE SHANK IS 0.1875 IN. WIDE BY 0.250 IN. THICK BY 0.500 IN. LONG; BOTH ENDS OF THE DRILLED HOLE ARE COUNTERSUNK,0.25 BY 45 DEGREE ANGLES; USED ON XM1 | | STYLE DESIGNATOR | SHOULDER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.880 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
|
|