|
|
|
National Stock Number:
5315-01-049-0157
Federal Supply Class:
5315
National Item Identification Number:
010490157
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 16F0103-7 | 81755 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| CHAMFER LENGTH | 0.040 INCHES NOMINAL | | DIAMETER | 0.373 INCHES MINIMUM AND 0.374 INCHES MAXIMUM | | HEAD STYLE | THUMB NO. 4 | | HEAD WIDTH | 1.625 INCHES NOMINAL | | HEIGHT | 0.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720 COMP 302 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 302 OVERALL | | PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | SPECIAL FEATURES | HEAD IS 0.125 IN. THICK WITH TWO 0.200 IN. HOLES CENTERED 0.875 IN. APART,ONE WING CHAMFERED 25 DEG 0.25 IN.TWO PLACES AND FLATTED 0.375 IN. FROM CENTER | | STYLE DESIGNATOR | STRAIGHT | | UNDER HEAD LENGTH | 2.130 INCHES NOMINAL | | WIDTH ACROSS FLATS | 1.625 INCHES NOMINAL |
|
|