|
|
|
National Stock Number:
5315-00-973-4557
Federal Supply Class:
5315
National Item Identification Number:
009734557
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| C4WM1118-1 | 71867 | DE HAVILLAND AIRCRAFT OF CANADA LIMITED |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHANK LENGTH | 0.570 INCHES MINIMUM AND | | 0.590 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.590 INCHES MINIMUM AND | | 0.610 INCHES MAXIMUM | | SHANK DIAMETER | 0.309 INCHES MINIMUM AND | | 0.311 INCHES MAXIMUM | | OVERALL LENGTH | 1.470 INCHES MINIMUM AND | | 1.490 INCHES MAXIMUM | | SECOND SHANK DIAMETER | 0.309 INCHES MINIMUM AND | | 0.311 INCHES MAXIMUM | | SECOND SHANK LENGTH | 0.790 INCHES MINIMUM AND | | 0.810 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND | | 0.030 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 44.5 DEGREES MINIMUM AND | | 45.5 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | FIRST END LOCATION | BOTH ENDS | | THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD SIZE | 0.312 INCHES | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.290 INCHES MINIMUM AND | | 0.310 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.066 INCHES MINIMUM AND | | 0.086 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.140 INCHES MINIMUM AND | | 0.160 INCHES MAXIMUM | | SURFACE FINISH | 125.000 MICROINCHES OVERALL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 71867 | | DESIGN CONTROL REFERENCE | C4WM1118-1 |
|
|