|
|
|
National Stock Number:
5315-00-965-6397
Federal Supply Class:
5315
National Item Identification Number:
009656397
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 28958-18-2 | 11599 | TRIUMPH ENGINE CONTROL SYSTEMS LLC |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 25.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.031 INCHES MINIMUM AND 0.062 INCHES MAXIMUM | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 416 OVERALL | | PIN OVERALL LENGTH | 0.500 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.2519 INCHES MINIMUM AND 0.2521 INCHES MAXIMUM | | SECOND END TAPER LENGTH | 0.062 INCHES MINIMUM AND 0.094 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 4.0 DEGREES MINIMUM AND 12.0 DEGREES MAXIMUM | | SPECIAL FEATURES | SMALL CHAMFER END MAY BE 0.031 IN. MIN,0.062 IN. MAX RADIUS IN LIEU OF CHAMFER | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|