| CHAMFER LENGTH | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| DIAMETER | 0.0920 INCHES MINIMUM AND 0.0925 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.065 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.033 INCHES MINIMUM AND 0.038 INCHES MAXIMUM |
| HARDNESS RATING | 44.0 ROCKWELL C MINIMUM AND 54.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD STYLE | FLAT |
| HEIGHT | 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5657 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 632 OVERALL |
| PIN CHAMFER ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| PIN HEAD DIAMETER | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| STYLE DESIGNATOR | STRAIGHT |
| SURFACE FINISH | 32.0 MICROINCHES GRIP |
| SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER |
| SURFACE FINISH | 63.0 MICROINCHES HEAD BEARING SURFACE |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| UNDER HEAD LENGTH | 0.460 INCHES MINIMUM AND 0.480 INCHES MAXIMUM |