| CHAMFER LENGTH | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| DIAMETER | 0.123 INCHES MINIMUM AND 0.127 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE TO FLAT | 0.062 INCHES MINIMUM AND 0.072 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.033 INCHES MINIMUM AND 0.038 INCHES MAXIMUM |
| HARDNESS RATING | 25.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD STYLE | DEE |
| HEIGHT | 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5613 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 410 OVERALL |
| PIN CHAMFER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| PIN HEAD DIAMETER | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| STYLE DESIGNATOR | STRAIGHT |
| SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER |
| SURFACE FINISH | 63.0 MICROINCHES HEAD BEARING SURFACE |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| UNDER HEAD LENGTH | 0.915 INCHES MINIMUM AND 0.935 INCHES MAXIMUM |