|
|
|
National Stock Number:
5315-00-923-5444
Federal Supply Class:
5315
National Item Identification Number:
009235444
Description:
PIN,GROOVED,HEADLESS
Detail:
A headless item of various shapes, usually cylindrical, having either circular or longitudinal groove(s). Its length must not exceed 12 inches (304 MM). Excludes ROD, GROOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
|
Manufacturer Information:
| 2122700-146 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 2122700-146 | 44114 | BAE SYSTEMS LAND & ARMAMENTS L.P. | | 2122700PC-146 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 2122702-146 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 2122704-6 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 5315PL0915877 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | PL2122700-146 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| EFFECTIVE LENGTH | 1.375 INCHES NOMINAL | | DIAMETER | 0.5001 INCHES MINIMUM AND 0.5003 INCHES MAXIMUM | | FIRST END LOCATION | OPPOSITE GROOVED END | | FIRST END STYLE | SQUARE W/THRU HOLE | | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL | | OVERALL LENGTH | 1.625 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4140 OVERALL | | SPECIAL FEATURES | 0.259 IN. MIN. 0.269 IN. MAX. DIAMETER LONGITUDINAL HOLE; GROOVE END 0.250 IN. 20UNC-2B,0.532 IN. MIN. 0.592 IN. MAX. LENGTH | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | SQUARE INTERNALLY THREADED | | STYLE DESIGNATOR | GROOVE | | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DOD-P-15232 TY M,CLASS 1 NATIONAL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE MANGANESE OVERALL | | UNDERCUT DIAMETER | 0.395 INCHES MINIMUM AND 0.396 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.060 INCHES MINIMUM AND 0.064 INCHES MAXIMUM |
|
|