|
|
|
National Stock Number:
5315-00-923-5399
Federal Supply Class:
5315
National Item Identification Number:
009235399
Description:
PIN,GROOVED,HEADLESS
Detail:
A headless item of various shapes, usually cylindrical, having either circular or longitudinal groove(s). Its length must not exceed 12 inches (304 MM). Excludes ROD, GROOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
|
Manufacturer Information:
| 122703-72 | 10002 | MASTER LEVEL CONTROLS CO | | 1630000 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 2122701-72 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 2122703-72 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 2122704-4 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 2122701-72 | 44114 | BAE SYSTEMS LAND & ARMAMENTS L.P. | | 5315PL0894437 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | PL2122701-72 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| DIAMETER | 0.3759 INCHES MINIMUM AND 0.3761 INCHES MAXIMUM | | EFFECTIVE LENGTH | 0.688 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED W/THRU HOLE | | FIRST END TAPER ANGLE | 15.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.016 INCHES NOMINAL | | FIRST END LOCATION | BOTH ENDS | | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4130H OVERALL | | OVERALL LENGTH | 0.875 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | STYLE DESIGNATOR | GROOVE | | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-16232,TY M,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE OVERALL | | SPECIAL FEATURES | THRU HOLE THD ON GROOVED END 8-32 UNC 2B 0.345 IN. MIN 0.405 IN. MAX LG,WITH RETAINING RING | | UNDERCUT WIDTH | 0.053 INCHES MINIMUM AND 0.057 INCHES MAXIMUM | | UNDERCUT DIAMETER | 0.284 INCHES MINIMUM AND 0.285 INCHES MAXIMUM |
|
|