|
|
|
National Stock Number:
5315-00-918-0012
Federal Supply Class:
5315
National Item Identification Number:
009180012
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 37C302243P102 | 24446 | GENERAL ELECTRIC COMPANY | | 37C302243P102 | 31340 | ENJET AERO BLOOMFIELD, LLC | | 37C302243P102 | 99207 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| UNDER HEAD LENGTH | 0.845 INCHES MINIMUM AND | | 0.855 INCHES MAXIMUM | | DIAMETER | 0.3743 INCHES MINIMUM AND | | 0.3748 INCHES MAXIMUM | | HEAD STYLE | ROUND W/WRENCH FLATS | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | NICKEL ALLOY X-750 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5667 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL | | WIDTH ACROSS FLATS | 0.740 INCHES MINIMUM AND | | 0.760 INCHES MAXIMUM | | PIN HEAD DIAMETER | 1.500 INCHES MINIMUM AND | | 1.520 INCHES MAXIMUM | | HEIGHT | 0.080 INCHES MINIMUM AND | | 0.100 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.213 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.213 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.255 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.000 INCHES NOMINAL | | SURFACE FINISH | 63.0 MICROINCHES OVERALL | | SPECIAL FEATURES | 2 HOLES THD .190-32 UNF-3B |
|
|