|
|
|
National Stock Number:
5315-00-915-2006
Federal Supply Class:
5315
National Item Identification Number:
009152006
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 1585-42 | 13002 | GOODRICH CORPORATION | | 32-411725-3 | 34087 | KITCO LLC | | 32-411725-3 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6427 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHANK LENGTH | 0.451 INCHES NOMINAL | | SHOULDER DIAMETER | 0.4987 INCHES MINIMUM AND | | 0.4992 INCHES MAXIMUM | | SHANK DIAMETER | 0.437 INCHES NOMINAL | | OVERALL LENGTH | 1.751 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.040 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER LENGTH | 0.050 INCHES NOMINAL | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END LOCATION | SHANK END | | THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD SIZE | 0.437 INCHES | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.431 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.106 INCHES MINIMUM AND | | 0.113 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.157 INCHES MINIMUM AND | | 0.160 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.141 INCHES MINIMUM AND | | 0.198 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.407 INCHES MINIMUM AND | | 1.412 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 34087 | | DESIGN CONTROL REFERENCE | 32-411725-3 |
|
|