|
|
|
National Stock Number:
5315-00-914-9498
Federal Supply Class:
5315
National Item Identification Number:
009149498
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 37B202001P108 | 1WCW6 | DRASUM LTD | | 37B202001P108 | 96972 | GENERAL ELECTRIC CO FLIGHT PROPULSION DIVISION OF ELECTRONIC ATOMIC AND DEFENSE SYSTEMS GROUP | | 37B202001P108 | 99207 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| CHAMFER LENGTH | 0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM | | DIAMETER | 0.1240 INCHES MINIMUM AND 0.1245 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.107 INCHES MINIMUM AND 0.117 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.067 INCHES NOMINAL | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM OVERALL | | HEAD STYLE | FLAT | | HEIGHT | 0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL | STEEL OVERALL | | PIN CHAMFER ANGLE | 14.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM | | PIN HEAD DIAMETER | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | STYLE DESIGNATOR | STRAIGHT | | SURFACE FINISH | 63.0 MICROINCHES OVERALL | | SURFACE TREATMENT | NICKEL OVERALL | | UNDER HEAD LENGTH | 0.630 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
|
|