|
|
|
National Stock Number:
5315-00-905-9859
Federal Supply Class:
5315
National Item Identification Number:
009059859
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| MS16556-623 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS16556-623 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 4.0 DEGREES MINIMUM AND 12.0 DEGREES MAXIMUM | | FIRST END TAPER LENGTH | 0.008 INCHES MINIMUM AND 0.031 INCHES MAXIMUM | | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM AND 64.0 ROCKWELL C MAXIMUM OVERALL | | MATERIAL | STEEL COMP 416 OVERALL | | PIN OVERALL DIAMETER | 0.0947 INCHES MINIMUM AND 0.0949 INCHES MAXIMUM | | PIN OVERALL LENGTH | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 20.0 DEGREES MINIMUM AND 30.0 DEGREES MAXIMUM | | SECOND END TAPER LENGTH | 0.021 INCHES NOMINAL | | SPECIAL FEATURES | SMALL CHAMFER END MAY BE 0.062 IN. MIN 0.063 IN. MAX RADIUS IN LIEU OF CHAMFER | | SURFACE FINISH | 16.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|