| DIAMETER | 0.9970 INCHES MINIMUM AND 0.9975 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 1.250 INCHES NOMINAL |
| EFFECTIVE LENGTH | 2.344 INCHES MINIMUM AND 2.375 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 43.0 DEGREES NOMINAL AND 47.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL |
| FIRST END LOCATION | BOTH ENDS |
| FIRST HOLE DIAMETER | 0.187 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL | STEEL OVERALL |
| OVERALL LENGTH | 2.656 INCHES MINIMUM AND 2.719 INCHES MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SECOND UNDERCUT WIDTH | 0.046 INCHES MINIMUM AND 0.049 INCHES MAXIMUM |
| SPECIAL FEATURES | ONE HOLE CENTER LONGITUDINAL 0.187 IN. DIA BY 1.500 IN. DEEP 1/8-27 NPT |
| STYLE DESIGNATOR | GROOVE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| UNDERCUT WIDTH | 0.046 INCHES MINIMUM AND 0.049 INCHES MAXIMUM |
| UNDERCUT DIAMETER | 0.937 INCHES MINIMUM AND 0.943 INCHES MAXIMUM |