|
|
|
National Stock Number:
5315-00-891-8392
Federal Supply Class:
5315
National Item Identification Number:
008918392
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 209-030-636-1 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720,TYPE 303,COND B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 299-099-031,FSCM 97499 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.136 INCHES MINIMUM AND | | 0.142 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.136 INCHES MINIMUM AND | | 0.142 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.137 INCHES MINIMUM AND | | 0.157 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.950 INCHES MINIMUM AND | | 0.960 INCHES MAXIMUM | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | PIN OVERALL LENGTH | 1.244 INCHES MINIMUM AND | | 1.264 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.2480 INCHES MINIMUM AND | | 0.2495 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 97499 | | DESIGN CONTROL REFERENCE | 209-030-636-1 |
|
|