|
|
|
National Stock Number:
5315-00-890-3168
Federal Supply Class:
5315
National Item Identification Number:
008903168
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| A51P60705-11 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | A51P60705-11 | 61174 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | PLA51P60705 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | A51P60705-11 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL | | FIRST END LOCATION | THREADED END | | HARDNESS RATING | 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL | | OVERALL LENGTH | 2.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 630 OVERALL | | NOMINAL THREAD SIZE | 0.312 INCHES | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.047 INCHES NOMINAL | | SECOND SHANK DIAMETER | 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM | | SECOND SHANK LENGTH | 1.875 INCHES NOMINAL | | SHANK DIAMETER | 0.312 INCHES NOMINAL | | SHANK LENGTH | 0.750 INCHES NOMINAL | | SHOULDER DIAMETER | 0.500 INCHES NOMINAL | | SHOULDER WIDTH ACROSS FLATS | 0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM | | SPECIAL FEATURES | LARGE STUD END DRILLED LONGITUDINALLY 0.186 IN. MIN,0.192 IN. MAX DIA BY 1.500 IN. DEEP | | STYLE DESIGNATOR | SHOULDER | | SURFACE FINISH | 125.000 MICROINCHES OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.750 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 24 | | CRITICALITY CODE JUSTIFICATION | AAZE | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
|
|