|
|
|
National Stock Number:
5315-00-881-2218
Federal Supply Class:
5315
National Item Identification Number:
008812218
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 5315008812218 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5315008812218 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | NAS35810-39 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MIL-P-27235A | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS35810-39 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.328 INCHES NOMINAL | | CHAMFER LENGTH | 0.187 INCHES NOMINAL | | DIAMETER | 0.875 INCHES NOMINAL | | FEATURES PROVIDED | CASEHARDENED | | FIRST HOLE DIAMETER | 0.171 INCHES NOMINAL | | HARDNESS RATING | 70.0 ROCKWELL C MINIMUM OVERALL | | HEAD STYLE | FLAT CHAMFER | | HEIGHT | 0.312 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL | STEEL COMP 1010 OR STEEL COMP 1111 OVERALL | | PIN HEAD DIAMETER | 1.062 INCHES NOMINAL | | PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL | | SHEAR STRENGTH | 39700 DOUBLE POUNDS PER SQUARE INCH | | STYLE DESIGNATOR | STRAIGHT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | UNDER HEAD LENGTH | 2.343 INCHES NOMINAL |
|
|