|
|
|
National Stock Number:
5315-00-880-5991
Federal Supply Class:
5315
National Item Identification Number:
008805991
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 369A7129 | 02731 | MCDONNELL DOUGLAS HELICOPTER CO INC | | 369A7129 | 8V613 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,COND F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND | | 40.0 ROCKWELL C MAXIMUM OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHANK LENGTH | 1.500 INCHES NOMINAL | | SHOULDER DIAMETER | 0.312 INCHES MINIMUM AND | | 0.313 INCHES MAXIMUM | | SHANK DIAMETER | 0.246 INCHES MINIMUM AND | | 0.249 INCHES MAXIMUM | | OVERALL LENGTH | 2.600 INCHES MINIMUM AND | | 2.660 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.022 INCHES MINIMUM AND | | 0.032 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 44.5 DEGREES MINIMUM AND | | 45.5 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | FIRST END LOCATION | BOTH ENDS | | THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD SIZE | 0.250 INCHES | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 1.030 INCHES MINIMUM AND | | 1.090 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.095 INCHES MINIMUM AND | | 0.100 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.062 INCHES MINIMUM AND | | 0.065 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.370 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.010 INCHES NOMINAL | | SURFACE FINISH | 125.000 MICROINCHES OVERALL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 8V613 | | DESIGN CONTROL REFERENCE | 369A7129 |
|
|