| DIAMETER | 0.490 INCHES MINIMUM AND 0.494 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 1.650 INCHES MINIMUM AND 1.770 INCHES MAXIMUM |
| EFFECTIVE LENGTH | 1.190 INCHES MINIMUM AND 1.210 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 29.5 DEGREES NOMINAL |
| FIRST HOLE DIAMETER | 0.124 INCHES MINIMUM AND 0.129 INCHES MAXIMUM |
| FIRST END TAPER LENGTH | 0.170 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| GRIP LENGTH | 1.240 INCHES MINIMUM AND 1.280 INCHES MAXIMUM |
| HEAD STYLE | KNURLED NO. 1 |
| HEIGHT | 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | DRILLED THRU HEAD |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18732,COND HT-115 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 431 OVERALL |
| PIN HEAD DIAMETER | 0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| STYLE DESIGNATOR | GROOVE |
| SURFACE FINISH | 125.0 MICROINCHES OVERALL |
| UNDER HEAD LENGTH | 1.460 INCHES MINIMUM AND 1.580 INCHES MAXIMUM |
| UNDERCUT DIAMETER | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| UNDERCUT RADIUS | 0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |