|
|
|
National Stock Number:
5315-00-718-6798
Federal Supply Class:
5315
National Item Identification Number:
007186798
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 204-011-446-003 | 97499 | BELL TEXTRON INC | | 204-011-446-3 | 53037 | HC MERCHANDISERS, INC. | | 204-011-446-3 | 81996 | U S ARMY AVIATION AND MISSILE COMMAND | | 204-011-446-3 | 97499 | BELL TEXTRON INC | | 204-011-446-3 | D0216 | GENERAL ATOMICS AEROTEC SYSTEMS GMBH |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 COND C4 MIL SPEC SINGLE MATERIAL RESPONSE OR | | MIL-S-5626 COND C4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 23.0 ROCKWELL C MAXIMUM OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHANK LENGTH | 0.400 INCHES NOMINAL | | SHOULDER DIAMETER | 0.970 INCHES MINIMUM AND | | 1.030 INCHES MAXIMUM | | SHANK DIAMETER | 0.6248 INCHES NOMINAL | | OVERALL LENGTH | 1.970 INCHES MINIMUM AND | | 2.030 INCHES MAXIMUM | | SECOND SHANK DIAMETER | 0.6266 INCHES NOMINAL | | SECOND SHANK LENGTH | 1.125 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL | | FIRST END TAPER ANGLE | 44.5 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER LENGTH | 0.060 INCHES NOMINAL | | SECOND END TAPER ANGLE | 45.5 DEGREES NOMINAL | | FIRST END LOCATION | BOTH ENDS | | SURFACE FINISH | 63.000 MICROINCHES OVERALL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 97499 | | DESIGN CONTROL REFERENCE | 204-011-446-3 |
|
|