|
|
|
National Stock Number:
5315-00-688-8066
Federal Supply Class:
5315
National Item Identification Number:
006888066
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 12-10571 | 45934 | ONTIC ENGINEERING & MANUFACTURING, INC | | 12-10571 | 56705 | DONALLCO INC | | 12-10571 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 30.0 DEGREES NOMINAL | | FIRST END LOCATION | LARGE END | | FIRST HOLE DIAMETER | 0.185 INCHES MINIMUM AND 0.193 INCHES MAXIMUM | | FIRST END TAPER LENGTH | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM | | FIRST STEP DIAMETER | 0.4915 INCHES MINIMUM AND 0.4920 INCHES MAXIMUM | | FIRST STEP LENGTH | 1.023 INCHES NOMINAL | | HARDNESS RATING | | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530,TEMPER H FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY 172 OVERALL | | NOMINAL THREAD SIZE | 0.190 INCHES | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | SQUARE | | SECOND STEP DIAMETER | 0.3120 INCHES MINIMUM AND 0.3123 INCHES MAXIMUM | | SECOND STEP LENGTH | 0.7155 INCHES NOMINAL | | STYLE DESIGNATOR | SHOULDER | | SURFACE FINISH | 60.0 MICROINCHES OVERALL | | SPECIAL FEATURES | SHOULDER BORED AND GROOVED--BORE,0.250 IN. DIA AND 0.300 IN. DEEP,GROOVE,0.156 IN. WIDE AND 0.119 IN. DEEP; UNDERCUT,0.281 IN. DIA AND 0.062 IN. WIDE BETWEEN FIRST AND SECOND STEPS; AND UNDERCUT,0.130 TO 0.140 IN. DIA AND 0.047 IN. WIDE BETWEEN SECOND AND THIRD STEPS | | THIRD STEP DIAMETER | 0.184 INCHES MINIMUM AND 0.190 INCHES MAXIMUM | | THIRD STEP LENGTH | 0.3765 INCHES NOMINAL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.3765 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF |
|
|